LINHAI JIUYUAN PLASTIC INDUSTRY CO., LTD

+ 86 15057621888

News center

Home page

Modified nylon PA6+30% glass fiber injection molding points

Modified nylon PA6+30% glass fiber injection molding points

Modified section of 30% glass fiber reinforced PA6 is the ideal material for processing electric tool shell, electric tool parts, construction machinery parts and new energy automobile parts. Its mechanical properties, dimensional stability, heat resistance and aging resistance have been significantly improved. The fatigue resistance strength is 2.5 times that of unenhanced, and the modification effect is the most obvious

17

2023

/

01

How to do injection molding for thin-walled injection parts

How to do injection molding for thin-walled injection parts

Standard injection machines can be used to produce a variety of thin-walled products. The performance of the new injection machines now exceeds that of 10 years ago. Advances in materials, gate technology and design have further broadened the ability of standard injection machines to fill thin wall parts. But because of the decreasing wall thickness, a more special injection machine with high speed and high pressure performance is needed.

30

2022

/

11

How to choose plastic mold manufacturers see these three points

How to choose plastic mold manufacturers see these three points

When developing products or trial-making new products, some users tend to focus on product development and development at the initial stage, ignoring the communication with plastic mold production units.

30

2022

/

11

Analysis and calculation of cooling time of injection molding workpiece

Analysis and calculation of cooling time of injection molding workpiece

In injection production, the cooling time of plastic injection processing workpiece accounts for about 80% of the whole injection production cycle. Poor cooling often leads to warping deformation or surface defects, affecting the dimensional stability of products. Reasonable arrangement of injection, pressure holding and cooling time can improve product quality and productivity.

30

2022

/

11

How to improve the precision of thin wall injection molding?

How to improve the precision of thin wall injection molding?

The application range of plastic parts is more and more wide, from simple tableware, kitchenware to complex mechanical parts, electronic products shell are useful to plastic parts, but for electronic products shell and other high precision requirements of plastic parts, in injection molding manufacturing from the beginning of the mold manufacturing should pay attention to its precision requirements.

30

2022

/

11

What are the commonly used raw materials for injection parts?

What are the commonly used raw materials for injection parts?

Generally refers to large production, good formability, cheap, widely used plastics. General plastics include five kinds, polypropylene (PP), polyethylene (PE), polyvinyl chloride (PVC), polystyrene (PS), acrylic - butadiene - styrene copolymer (ABS), are thermoplastics.

30

2022

/

11

< 1 2 >

Linhai Jiuyuan Plastic Industry Co., Ltd.

Contact

General Manager Jaden

Mob:

86-15057621888

Wechat: Y1870886945

E-mail

wxl_006@lhjiuyuan.cn

Address

No. 158, South Jingjiang Road, Jiangnan Street, Linhai City Taizhou

Copyright ? Linhai Jiuyuan Plastic Industry Co., Ltd. All Rights Reserved.

Powered by 300.cn

<small id="drac7"></small>

<b id="drac7"><del id="drac7"></del></b>